Mini Snake

650 mm mobile CB antenna, mounted to the joint via a wing nut.
The antennas are supplied with joints for the NE connector, which has a 12 mm mounting hole and a connector height of 15 mm below the joint.
This type of connector is particularly suitable for indoor use (it is not moisture-resistant).
The second type of joint is the NF, which has a mounting hole of 8 mm and a connector height of 35 mm below the joint.
This type of connector is suitable for outdoor use (clamps, fasteners, etc.)
. Maximum short-term power handling: 40 W; long-term: 10 W; vertical polarization; 4-meter RG58 cable; mounting hole diameter: 12.5 mm.

TECHNICAL


PARAMETERS--------------------------------------------- Impedance ..............................................
50 - Frequency range...................................27–28.5
MHz—Polarization................
................................vertical—S.W.R......................................................1.2:1
- Bandwidth............................................1,000 kHz
- Maximum power......................................10 watts continuously / 40 watts for short periods-
Antenna length...........................................650
mm- Antenna weight......................................350
g- Mounting hole.........................................12 mm NF joint tip / 8 mm
NE joint tip- Connector height below the socket ....................15 mm NE joint / 35 mm NF


joint The station connector is not included in the delivery.

If shipped via a courier service, a surcharge of 40 CZK (excluding VAT) is charged for special packaging.