24/220 1000W Converter

24V to 220V voltage converter, continuous load 1000W, modified sine wave

The

converter converts 24V DC to 230V AC.
This allows you to connect a wide variety of 230V appliances to the power source (in a car, on a boat, at a cabin, or while camping).
Comprehensive protective measures safeguard both the inverter and the connected power sources.
Connect the inverter directly to the battery, and you can use devices such as battery chargers, laptops, or other electrical appliances—always taking into account the device’s maximum continuous power rating.
Audible alarm in case of undervoltage or overload.
Short-circuit resistant.
Battery

discharge protection Product features:
Compact housing design, high efficiency
Designed to provide high-quality performance, ease of use, and reliability
Low battery
capacity warning Low battery voltage—shutdown: The inverter automatically shuts down if the battery voltage drops below 20 volts. This protects the battery from complete discharge. An alarm is triggered at 21.2 volts.
High battery voltage shutdown: The inverter automatically shuts down if the input voltage rises to 31 volts or higher.
Overload
Shutdown Thermal Protection - Shutdown: The inverter automatically shuts down if its internal temperature rises above an unacceptable level.

Protection functions:
Low voltage: alarm and shutdown
Overvoltage
protection Overload
protection Thermal protection
Short-circuit
protection Reverse polarity
protection Soft start
Auto.reset
Ground fault

protection Note: When selecting an inverter, take into account the peak power draw of most appliances, which can be many times higher than the rated power listed on the nameplate
.